issue000002	Various kernel improvements
issue000003	Correct recovery of energy groups in Apolib2 files
issue000004	Implement support of discontinuity factors with Saphybs
issue000005	Commit the new module D2P: for the GenPMAXS interface
issue000006	Set of modifications to the SPH algorithm: Implement a consistent correction of the odd-parity PN equations Remove SPH001 correction option (P1W option in SPH: module) Implement Todorova flux weighting (P1W_T option) in EDI: module Remove SPH correction from EDI: module (was not used) Improve transport-transport equivalence in non-SPN cases Reintroduce the Bell acceleration procedure for Transport-PIJ equivalences
issue000007	Implement the SELE_ALB normalisation in SPH: module for SYBIL/ARM cases
issue000008	Improve cyclic tracking in SALT: module
issue000009	Correct the flux normalization factor in micro-depletion cases with Saphybs
issue000010	Implement user-defined Rowlands factors in THM:
issue000011	Improve stability of SVAT acceleration in Trivac
issue000012	Correct the BN fundamental mode model in highly subcritical cases to avoid failure
issue000013	Add keyword NMIX in module USPLIT: to expand the number of new fuels in fuelmap
issue000014	Set of improvements related to the binary tracking file in EXCELT:, NXT: and SALT: modules: Write angular subtrack direction indices for each cyclic track in tracking file Implement TLM: TSPC capabilities Harmonization of the normalization options between EXCELT:, NXT: and SALT: modules Improvement of subtrack normalization (REND option with NXT: and SALT: trackings.
issue000015	Implement the new sectorization specification for SECT keyword
issue000016	Correct the generation of depletion chains in SCR: module
issue000017	Implement a negative fixup after Runge-Kutta in EVO: module
issue000018	Improve support of virtual cells and correct documentation in EXCELT: module
issue000019	Implement the Linear Discontinuous Characteristics (LDC) scheme in MCCG: module: Implement enabling modifications in MCCGT:, SNT: and FLU: modules Correct the calculation of spherical harmonics in MOCCHR.f Correct a legacy bug in OUT: module of TRIVAC Correct a Ganlib5-related bug in LDRGEO.f Implement the Linear Discontinuous Characteristics (LDC) scheme Improve the GMRES algorithm used by the MOC Implement specular tracking in eight-symmetry cases Correct TLM: in 3D cases
issue000020	Implement the non-negative least-square fit method in SUBG option of USS:
issue000021	Correct a convergence failure in USSSPH.f
issue000022	Upgrade DRAGON5 with the latest release of NXT
issue000023	Correct invalid quadrature parameters in EXCELT: and SYBILT: modules
issue000024	Improvements to the THM: module: Extend the interpolation domain of THMGAP.f in burnup up to 90GWj/t Print the axially-averaged values of thermohydraulics values.
issue000025	Improvements to the DUO: module: Correct the REAC treatment and add LEAK reaction Add keyword RHS in FLU: module to recover leakage coefficients from RHS flux.
issue000026	Make D2P: module compatible with Multicompos
issue000027	Implement keyword ISOT in COMPO: module to select particularized isotopes
issue000028	Correct an issue related with keyword DELTA in SCR: and NCR: modules
issue000029	Modifications to the EDI: module Correct a bug related to condensation/homogenization of microscopic SCAT information in EDI: module Add REAC keyword in EDI: to restrict reaction selection in output microlib
issue000030	Implement unfolding of eight-symmetry assemblies for fine power reconstruction Implement directory GFF (group form factor) in macrolib Implement interpolation of GFF directory in NCR: Implement modifications in NAP: related to the GFF directory Implement mixture-dependent ADF and GFF information in NCR: and SCR: Implement MERG CELL REMIX option in EDI: Implement the possibility to use a fuel map not created by NAP:
issue000031	Correct an instability in THM: for low inlet temperature cases
issue000032	Initial commit of module MCC: for fuel map modification Add the possibility to define additional parameters in the fuel map
issue000033	Correct a bug in compo database generation
issue000034	Correct a -noopt issue related to Apolib2 access in LIB:
issue000035	Commit modifications in D2P: to support group form factors (Richard Chambon contract)
issue000036	Implement new sectorizations in G2S: module (including windmill sectorization)
issue000037	Implement the non-iterative multigroup equivalence procedure in USS: module
issue000038	Add the possibility to input ADF information in MAC: module
issue000039	Rename routines with .md9 suffix with a standard .f90 suffix
issue000040	Add NEWFUEL capability in TINST: module for hexagonal 3D geometry
issue000041	Correct the asymptotic calculation of PIJ in 1D slab geometry
issue000042	Correct the non-regression tests related to the PyNjoy 2012 system
issue000043	Correct the recovery of ENERGY record from Apolibs in XSM format
issue000044	Implement latest developments in the D2P: module
issue000045	Extend the applicability of module THM: to hexagonal geometry
issue000046	Correct the interpolation of the radioactive decay constant in module SCR:
issue000047	Change the EQUI name specification in modules SPH: and SCR: